2 Ways to Fix UEFI Boot in Windows 10, 8.1, 8, 7

Jun. 24, 2022 / Updated by Bessie Shaw to Windows Driver Solutions

Receiving the UEFI boot problem on your Windows PC? Don't panic. This article will introduce how to fix the UEFI boot error in Windows 10, Windows 8.1, Windows 8 and Windows 7.

Fix UEFI Boot in Windows 10/8.1/8

UEFI (EFI) is the abbreviation of Unified Extensible Firmware Interface, which is an updated version of BIOS. Nowadays, major brand computers are shipped with UEFI/EFI instead of BIOS. The UEFI/EFI brings improved security measures, faster startup times, support for disks larger than 2.2 TB and lot more. A broken UEFI means that you have a broken bootloader, so that you can’t reboot your computer normally, and you could use diskpart or automatic repair to fix the UEFI boot error in Windows 10, Windows 8.1 or 8.

1.Use Diskpart to Fix UEFI Boot in Windows 10/8.1/8

Step 1. Insert the Windows 10/8.1/8 installation disk or installation USB and boot from the disk or USB

Step 2. Click Repair your computer or hit F8 at the Install now screen

Step 3. Click Troubleshoot >Advanced options >Command Prompt

Step 4. Type the following commands one by one and hit Enter:
diskpart
DISKPART>
sel disk 0

Step 5. Once the message "Disk 0 is now the selected disk" appears, type list vol and hit Enter

Step 6. Diskpart will now show the full list of volumes on your PC, find the UEFI volume from the list

Note: The UEFI partition will be on Volume 2.

Step 7. Type below commands and hit Enter:
sel vol 2
assign letter=G:

Note: G: shall be a unique drive letter which cannot be already used.

Step 8. When the message "DiskPart successfully assigned the drive letter or mount point" shows up, type below commands and hit Enter:
exit
cd /d G:\EFI\Microsoft\Boot\
cd /d G:\Boot\ or cd /d G:\ESD\Windows\EFI\Microsoft\Boot\

Note: G: is the drive letter you’ve assigned to your UEFI partition. Remember to replace "G” with UEFI’s partition letter.

Step 9. Type the following commands and hit Enter:
bootrec /fixboot
ren BCD BCD.bak
bcdboot C:\Windows /l en-us /s x: /f ALL

Note: C:\ is the drive where Windows 10/8.1/8 is installed on.

Step 10. You can also run: bootrec /rebuildbcd and hit Enter

Step 11. Type: exit in Command Prompt and restart your computer

Now the UEFI boot in Windows 10/8.1/8 problem has been fixed and you can boot your computer again.

2.Run Automatic Repair to Fix UEFI Boot in Windows 10/8.1/8

Another effective solution to fix the UEFI BOOT bug in Windows 10, Windows 8.1 or Windows 8.1 is using the built-in Automatic Repair utility, which could fix errors with the UEFI bootloader of your computer. Follow these steps:

Step 1. Insert the Windows 10/8.1/8 installation disk or installation USB, restart your computer and then boot from the disk or USB

Step 2. Click Repair your computer at the Install now screen

Step 3. Click Troubleshoot at Choose an option screen and click Automatic Repair

Step 4. Choose an account from the list to continue at the Automatic Repair screen

Step 5. Wait for the automatic repair process to complete

Fix UEFI Boot in Windows 7 Using Bootrec/Bootsect

If you come across the UEFI boot problem in Windows 7, you could use Bootrec or Bootsect to tackle the issue. Please make sure that the UEFI/EFI load is set as active and in Legacy mode before you fix the UEFI bootloader in Windows 7. Follow these steps to run UEFI/EFI as Legacy.

Step 1. Restart your PC

Step 2. Open UEFI/EFI by pressing F2, F8, F12, Delete or Esc. The key depends on your PC brand.

Step 3. Search Secure Boot

Step 4. Disable or turn off Secure Boot

Step 5. Save settings and exit the UEFI/EFI setup menu

1.Use Bootrec to Fix Windows 7 UEFI

To use the Bootrec tool and fix the UEFI boot error in Windows 7, do the following steps:

Step 1. Insert the Windows 7 installation CD/DVD and boot from it

Step 2. Select language, keyboard and click Next

Step 3. Select the operating list (Windows 7) and click Next

Step 4. Click Command Prompt at System Recovery Options screen

Step 5. Type the following commands one by one and hit Enter:
bootrec /fixmbr
bootrec /fixboot
bootrec /ScanOs
bootrec /rebuildBcd

Step 6. Remove the installation CD/DVD, type: exit and hit Enter

Step 7. Restart your computer.

2. USe Bootsect to Fix Windows 7 UEFI

Follow these steps to use Bootsect to fix the UEFI boot problem in Windows 7.

Step 1. Insert the Windows 7 installation CD/DVD and boot from it

Step 2. Select language, keyboard and click Next

Step 3. Select the operating list (Windows 7) and click Next

Step 4. Click Command Prompt at System Recovery Options screen

Step 5. Type: bootsect /nt60 SYS /mbr and hit Enter

Step 6. Remove Windows 7 installtion CD/DVD, type: exit and hit Enter

Step 7. Restart your computer

Driver Download and Update for Windows 10/8.1/8/7

Outdated, corrupt, broken or missing drivers could result in various Windows issues, such as no Wi-Fi, no sound, screen flickering, blue screen, USB device not recognized, etc. It is very important to keep drivers updated on your Windows 10, Windows 8.1, Windows 8 or Windows 7 computer. It’s complicated to manually download drivers, to save time and frustration, it’s highly recommended to use a dedicated and reputable driver download and update utility tool like Driver Talent, which could list all your Windows drivers in seconds then automatically repair or update them within minutes.

Click the button below to grab Driver Talent directly.

Download Now

Perform the step-by-step guide to use Driver Talent to download and update Windows drivers for Windows 10, Windows 8.1, Windows 8 and Windows 7. For more information, you could also refer to the User Guide of Driver Talent.

1. Scan Your PC

Launch Driver Talent. Click the “Scan” button to detect all your faulty Windows drivers.

fix uefi boot in windows 10, 8.1, 8, 7

2. Repair or Update Windows Drivers

Click “Repair” to fix the detected Windows driver issues. Driver Talent will automatically download and install the most compatible drivers for your PC. Of course, you have the option to click “Update” to update all your drivers to the latest version. But don’t update what ain’t broken for stability purpose.

update windows drivers

3. Reboot Your PC

Reboot your PC to make the Windows drivers update take effect.

Note: Bear in mind that use Driver Talent to back up you drivers before updating your Windows drivers in case of driver crashes or other serious computer issues.

In addition to Windows drivers download and update, Driver Talent includes other advanced features, such as drivers restore, drivers uninstall, drivers pre-download for another PC, PC Repair (no sound, no video, no Wi-Fi etc.), hardware detection, VR support check and PC speed up, etc.

If you have any inquiry about fixing the UEFI boot error in Windows 10, Window 8.1, Windows 8 or Windows 7, please comment below.

Related Posts:

Tags: boot issue,

Recommended Download

	ExplorerMax			Driver Talent for Network Card
	Smart and advanced file explorer tool for Windows platforms			Download & Install Network Drivers without Internet Connection
	30-day Free Trial			Free Download

Contents